In case of power failure, LED battery luminaires from IVT and Staudte Hirsch equipped with the emergency light function become reliable emergency and safety illumination in rooms, corridors and staircases, especially in areas without windows or emergency power supply.
The emergency light function works on the standby principle: if the battery lamp is in the charging cradle during a power failure, it switches on automatically. The switching time is approx. 1 second. Due to the high-quality lithium batteries, a runtime of at least 4 hours is achieved at full power level.
Source:
https://www.zdf.de/nachrichten/politik/bbk-blackout-stromabschaltung-winter-energiekrise-100.html
Status 23.11.2022, 12:50 p.m.
Step 1 Connect the charging cradle or charging/wall bracket to the power supply unit and the power supply unit to the power supply. |
|
Step 2 Switch the light on. For the SH-5.100, SH-5.300 and PL-850 models, you can select the mode. |
|
Step 3 Place the light in the charging cradle. The light goes out. |
|
Step 4 Simulate a power failure by unplugging the mains adapter from the socket – the light switches on automatically in the selected mode or at the brightest brightness level. |
Step 1 Connect the charging cradle or charging/wall bracket to the power supply unit and the power supply unit to the power supply. |
Step 2 Switch the light on. For the SH-5.100, SH-5.300 and PL-850 models, you can select the mode. |
Step 3 Place the light in the charging cradle. The light goes out. |
Step 4 Simulate a power failure by unplugging the mains adapter from the socket – the light switches on automatically in the selected mode or at the brightest brightness level. |